Describe Your Project and Requirements for a Construction Site Camera System

The more information that you provide, the quicker and better our recommendations will be.
  • What are your expectations for a construction site camera system?
  • If you have a system design that you are considering, please describe in detail each device (camera, light, radio), where each device is located and how the devices are connected to each other.
  • Do you expect cameras to operate in zero light conditions? If there is very low light or zero light, and you expect cameras to operate at night, you may need to use cameras with built in infrared (IR) lighting for relatively short distances (up to 100') or add separate LED lighting systems for longer distances. LED lighting systems may be infrared light, white light or hybrid. LED lighting can be IP controllable. Note: hybrid system uses the IR light for cameras to operate, with white light activated when camera detects intruder, or white light can be set to strobe to warn away intruders.
  • If high speed internet is available at this location, can cat5/6e cable be run from camera locations to this internet connection modem? If you can't connect cameras to internet connection via cat5/6e cable, due to pavement or other obstacles, you may be able to use a point to point wireless link between cameras and your internet connection. For best performance clear line of sight required between sending and receiving radios.
  • If you DON'T HAVE high speed internet service at this location you will probably need to use 4G/LTE cellular communications to access your camera system.
  • Are you interested in any of the following options?