Chat with us, powered by LiveChat

Tech Talk Series by Jim Flick

By:
0
If you have a combination lock on your gate or a gate key housed in a combination key box, we can give the access code to the responding police to reduce the time it takes them to get inside to search your site. This can make a huge difference if your site is large and it is difficult to see everyth ...
Read more →
By:
0
RadiusVision can customize how EACH camera trigger is handled by the central station when a human is seen in the video. This can help to reduce false alarms to the police or get the proper company personnel contacted depending on the circumstances. An example might be a camera that covers the entry ...
Read more →
By:
0
Your siren/strobe can do things no other siren can do! It can tell the difference between an intruder and a raccoon or an intruder and flapping plastic and which one needs to have the siren/strobe activated. It also knows the difference between daylight and darkness and knows if neighboring dwelling ...
Read more →
By:
0
When you’re ready to shut down and move your system, first turn off the central station communicator (see Tech Talk #20 on how to do this) or you can remove the batteries from the head-end so the system will stop sending the daily timer test. Call, text or email me so I can suspend your central st ...
Read more →
By:
0
Turning off the central station communicator is required when shutting down a system to suspend the monitoring billing. Here are the steps:Wake up the keypad, then press the right arrow and go to Access Level 1. Press OK, then press the right arrow until it says Access Level: 4 then press OK and ent ...
Read more →
By:
0
Be careful when mounting and aiming your cameras not to have the mounting surface included in the view of the camera. In total darkness the IR illuminators will bathe the surface close to the camera with intense IR light, causing overexposure of the foreground surface closest to the camera. Since al ...
Read more →
By:
0
Did you know your existing system can be connected to broadband and AC power? Most site deployments are done 100% wireless and on battery power, however you can optionally connect your head-end control communicator to power and broadband (Internet service) to add a redundant (slightly faster) commun ...
Read more →
By:
0
If you ever want to arm your system with a camera turned off here is how to do it.With the system disarmed, press and hold the #2 key (labeled Bypass) until it says Badge Or Code then enter your 4-digit code and press OK or present your prox tag to the reader. The keypad will read 03:Cam 1 Not Bypas ...
Read more →
By:
0
A word of common-sense advice: Someone could take a paper bag and slip it over a camera without triggering the camera tamper accelerometer, blinding the PIR and rendering that camera useless for detecting an intruder. Same goes for a carefully placed sheet of plywood or drywall that blocks th ...
Read more →
By:
0
Built into each Videofied camera is an accelerometer which monitors the position of the camera, similar to what we have in our smartphones. If a camera were to be moved by an intruder or strong winds or struck by a falling tree branch enough to cause it to alter its position, the tamper feature will ...
Read more →
Get a Quote

 

A RadiusVision representative will contact you within 1 business day in reply to your request or to discuss your project.

  • What are you looking for? Describe your request, project or requirements.

×
Integrator Contact and Project Info

 

A RadiusVision representative will contact you within 1 business day to discuss your project.

×
Get a Quote

 

A RadiusVision representative will contact you within 1 business day in reply to your request or to discuss your Mobotix project.

  • If you know what you want, please list the model numbers and quantities

×
RadiusVision Security Station, basic
×