System Status – Tech Talk #3

Did you know there’s a quick way to look at the health of your Videofied system? Using the alpha keypad with the system disarmed, press and hold the OK key for 5 seconds, the LCD display will indicate if there are any current problems. If no problems are present it will say Ready To Arm. Press OK again to exit the status mode.

Some of the problems that can be displayed are Low Battery, RF Supervision, Tamper, Cellular Problem, No AC Power, and Ethernet Problem.

If there is a problem displayed, press the right arrow key to see if there are additional problems to report. Each press of the right arrow button will show the next problem. When you see a problem repeated, you know you have been through the entire list. Press OK to exit the status mode.